These lightweight and compact compressors feature a one-point lifting eye that makes moving the unit at the work site quick and easy.
All compressors, including trailer types, are equipped with a lifting eye.
Denyo's high-performance after cooler prevents freezing by extracting moisture from the discharging air, while also eliminating the rust and grime build-up of spattering water. This also keeps the breaker from being overheated by the after cooler.
DENYO’s DLW series welders are equipped with Welding Mode Selector Switch which enables the welding workers to change the working mode between the drooping characteristics mode and the constant current characteristic mode.
DENYO’s engine-driven welding machines is capable to reduce the welding open circuit voltage down to 15V for non-working conditions and thus it is possible to prevent electric shocks of welding workers even at a place of a high altitude and a high humidity.
Denyo’s welding machines realized duty cycle 100% by adopting high-performance generators and allowance-rich engines.
DCW-480ESW can perform high-quality welding on pipelines and other welding methods. (Types of welding: Stick, Tig, Mig, Flux-cored, Gouging, etc.)
The unit can also be used as a 15kVA/50Hz high-capacity generator. With a voltage regulation of within +-1.5%. High-quality AC power can be used while welding is being performed.
The unit incorporate high-output diesel engine featuring low fuel consumption. Operation at low speed is easy on the engine, facilitating especially long life.
The unit has been designed to operate in virtually all locations, from very hot to cold climates. It is ideal for high-quality welding and as a dependable source of power.
Greatly improved arc welding performance
100% duty cycle realized at 400A
Compact, lightweight and quiet
Improved energy efficiency
Denyo power generators are capable of generating power in various situations where public power supply is not available. They contribute to build infrastructure of society and are highly appreciated by customers all over the world. In a variety of situations like civil engineering works and construction works to build infrastructure of our society.
Denyo engine power generators are capable of providing power at various sites where power is required like civil work and construction sites as well as are also employed in various facilities as emergency power source for critical equipment like medical equipment in hospital, bank online system and traffic signals etc.
When compared with our conventional models, dry weight is reduced by1800 kgand a compact design has been achieved by reducingthe total width and height by150 mm and 160 mm, respectively. This makes it possible to transport the DCA-1100SPC in a 14-ton low-floor truck, therebysaving transportation costs.
Fuel consumption is improved by6% (50Hz), or 8% (60Hz) at rated load, when compared with our conventional models.
This power generator has lower waveform distortion and higher reverse tolerance against rectifier loads realized byimproving damper windings. Less instantaneous voltage dropand shorter voltage recoverytime lowers the impact on other electric devices in sequential operations.
Denyo’s original high-performance Automatic Voltage Regulator (AVR) maintains superb stability output by keeping voltage regulation within ±1.0%.
A standard “Emergency Stop Device” will shut down the generator automatically when a malfunction is detected. In addition, an In-Built Breaker” protects the generator from overloads (the warning light for models less or equal DCA-15LSX will turn on when Low Oil Pressure, High Water Temperature and Insufficient charging are detected. The safety-monitoring-indicator used in models over DCA-18ESX will turn on when Low Fuel Level, Dust, Low Oil Pressure, High Water Temperature, and other Foreign Particles inside the unit is detected.) And optional “Earth Leakage Relay” protects the user from electrocuted (models for DCA-6LSX, 15LSX, 18ESX).
Denyo's original high-performance Automatic Voltage Regulator (AVR) maintains superb stability output by keeping voltage regulation within ±0.5% (*DCA-400P is ±1.0%)
Denyo Generators are produced in our own promise; from designing and manufacturing the parts (except engine) up to the final assembly and control. Therefore we are able to respond quickly to the needs of our customers even for custom-made devices with short delivery times.
Denyo high quality generator for commerical use employs stronger windings, compared to other products. Due to the low noise level it qualifies especially for loads from inverters or electric devices like computers etc. Excellent starting performance due to the low transient reactance and the unique exciatation system.
This power generator has lower waveform distortion and higher reverse tolerance against rectifier loads realized by improving damper windings. Less instantaneous voltage drop and shorter voltage recovery time lowers the impact on other electric in sequential operations.
TLG SERIES: DENYO’S newly developed technology has been utilized with environmental considerations. This TLG series are three phase and single phase models. These models are equipped with the engine of two poles and it can meet in any applications. Incorporating a revolutionary compact design, using advanced “Know-How”, it improves in operation, performance characteristics, and maintainability. The TLG Series illustrates that DENYO is keeping it’s commitment to develop new technology for tomorrow’s power needs.